Screed Pump Hire Sydney: Builder's Handbook

Hiring a screed pump in Sydney is not like hiring a concrete pump. The equipment is specialised, the product is different, and the setup requirements are specific. Here is what builders and project managers need to know before booking.

What a Screed Pump Actually Does

A screed pump is a road-based batch truck that mixes self levelling compound mechanically by weight, then pumps it through a hose to the pour area. It is not a concrete mixer truck. The product is a thin, flowable cement-based screed designed to create a flat, smooth substrate for floor coverings.

PowerPump's truck delivers over 500 bags per hour with vertical reach to 60 floors. A typical apartment level of 150 square metres takes two to three hours from arrival to finish.

Site Access Requirements

The truck needs hardstand access within hose reach of the pour area. For high-rise work, the hose runs through the service lift or stairwell. For ground-level work, the truck parks in the driveway or loading bay. The pump operator assesses access on arrival and sets up the hose run before mixing begins.

Water and power are required on site. The truck carries its own power for the pump and mixer, but water is needed for the system. A standard garden tap is sufficient.

How Pricing Works

Screed pump hire is priced by the square metre and the depth of the pour. PowerPump's instant quote calculator on the home page gives you a figure in 10 seconds using the standard conversion rate of 1.82 kg per square metre per millimetre. For a fixed project price, send through your floor plan and the required depth.

What Is Included

PowerPump's hire includes the product, the pump truck, the hose, the pump operator, and the screed crew. All you provide is the slab, the water, and the access. Supply and install in one booking means one invoice, one point of contact, and one programme slot.